NESS X SERIES FEATURES
56 USER CODES
Each user code can be assigned to AREA1, AREA2, CODE ONLY
ARMING, ARM ONLY, KEYPAD CODE, RADIO CODE, ACCESS CODE READER1, 2 OR 3.
ACCESS CONTROL FUNCTIONS
New access control features with flexible programming
options. Connect up to 3 access control proximity Weigand readers.
Use the access control option to open electric door locks
or arm/disarm the panel or both!
ARM/DISARM
USING PROX CARDS
The access control feature allows up to 55 individual
users to arm and disarm using proximity access cards. Prox cards can even be
used to operate electric doors locks for secure hands free entry.
MODULAR HOUSING
The new EB04 enhanced housing is tough and roomy with a
removable lid for easy access. The housing is generously fitted with
multiple standoff positions, cable tie loops, cable/conduit entry points and
unique slide-in carriers for the new X Series accessory boards.
ACCESSORIES
A new range of X Series slide-in accessory boards includes
a four Relay Board, a Reader Interface and the new X Series Output Expander
for both the D8x and D16x panels.
MAIN SOFTWARE
FEATURES
- 56 user codes can be assigned to 3 to 6 digits PIN
codes with keypad options including Area assignment, Arm Only options,
Code Only arming and much more.
- Two button arming feature..
- Fire Alarm feature with different siren tones..
- Input to output mapping..
- Programmable 2 area partitioning with overlapping of
zones in areas allowed.
- Programmable sensitivity for vibration sensors - zone
by zone basis.
- Programmable Long Response times for zones (1sec or
3sec).
- Monitor mode and Day Zone feature..
- Temporary Day Zone feature for Day Zone setup “On the
fly”.
- Single or double trigger option on a zone-by-zone
basis.
- Supports up to 55 Radio Keys..
- Access Control feature with provision for up to 3
Readers
- Supports up to 55 Proximity Access Cards or Fobs..
- Uses NessComms up/download software package
- Secure DTMF remote arming/disarming capabilities.
- Programmable siren/reset lockout.
- 30 event memory from keypad
- Expanded event memory can be accessed by NessComms™.
- Disable unused zones feature.
- Siren chirp/strobe flash on radio key arming with
‘quiet chirp’ option..
- Standard defaults to suit most applications..
- Quiet chirps on Arm/Disarm option.
- and much more...
MAIN HARDWARE
FEATURES
- 8 or 16 Fully programmable zones..
- D16x has 16 physical zone inputs or Zone Split option..
- 2 additional 24hr inputs..
- End Of Line supervision 2K2 or 3K3 programmable..
- D8x supports up to 3 remote LED or LCD Keypads..
- D16x supports up to 3 remote LCD Keypads.
- Plug-in Radio Interface supports any Ness radio device
- New Serial port for connection to future accessories.
- Fast direct connect upload/download via the Serial
port.
- Reader port connects up to 3 addressable access control
readers
- Output Expander option for both D8x and D16x..
- New LISTEN pins allow the installer to diagnose dialler
tones on site.
- True dynamic battery test hourly..
- 4 programmable auxiliary outputs..
- Programmable REX inputs for access control.
- Automatic resetting fuses on all outputs..
- Optional latching or momentary keyswitch arming option.
- Option for an extension sonalert to mimic all keypad
beeps.
- New attractive and versatile housing with installer
friendly design.
- Plug in accessory boards available..
- Complies with all relevant Australian and CE standards.
- and much more...
|